Use this paint calculator to work out how many litres a room needs from its size, doors, windows, number of coats and the coverage printed on your tin, with extra allowed and every step shown.
Paint calculator
Work out how many litres of paint a room needs, with doors, windows, coats and extra allowed for.
Result summary
Default estimate: walls and ceiling, 2 coats, 10 m² per litre, 10% extra, one door at 2 m².
How much paint do I need for a room?
Take a room 4 m long, 3 m wide and 2.4 m high. The walls are 2 x (4 + 3) x 2.4, which is 33.6 m². The ceiling is 4 x 3, which is 12 m². One door at 2 m² and a 1.5 m² window take off 3.5 m², so the area to paint is 33.6 - 3.5 + 12, which is 42.1 m².
With two coats at 10 m² per litre that is 42.1 x 2 / 10, or 8.4 litres. Adding 10 percent extra gives 9.3 litres. Round up to the tin sizes your brand sells. For comparison, Homebuilding says 10 litres of emulsion will typically do two coats on four walls and the ceiling in a room, with some left over for touch ups.
Paint coverage per litre
The default is 10 m² per litre, the figure the Wickes and B&Q calculators use. Neither gives a source for it. Homebuilding says a standard emulsion wall paint has a common coverage of between 12 and 14 m² per litre, also without a source. Dulux tells you to divide by the square metres per litre listed on your paint tin, so the best number is the one on your tin. Change the coverage field to match it.
Wickes warns that coverage depends on the surface condition, and that a strong colour change might mean you need more coats.
How many coats?
The default is two. Homebuilding says most interior walls will need two coats, and Wickes recommends two for most paints. Dulux says its Simply Refresh range needs only one coat, while its EasyCare Washable and Tough finish should be multiplied by two. Check the label on your own paint and pick one, two or three coats.
Painting the ceiling
Switch "Paint the ceiling" on and the calculator adds length times width to the wall area. Homebuilding takes a simpler route and counts the ceiling as a wall. Using the real length and width is closer for rooms that are not square.
Doors and windows
Each door takes off 2 m², which is Homebuilding's figure of 2 m² for a door. It says internal doors are typically around 2 metres tall and under 1 metre wide, and front and back doors are often slightly larger. No source I found gives a standard window size, so you enter the total window area yourself. B&Q's calculator also lets you exclude sockets and skirting boards, and you can include those in the windows field if you want. If the deductions are bigger than the wall area, the wall area is treated as zero rather than negative.
How much extra paint to buy
Wickes recommends adding an extra 10 percent to account for any errors, damage or obstacles, and B&Q recommends at least 10 percent extra. Homebuilding says that if you need 8 litres you should buy a 10 litre tub, which also leaves paint for touch ups. The extra field defaults to 10 and you can change it. The "Litres to buy" card includes it.
Estimating the cost
Enter the price per litre of your paint and the cost card multiplies it by the litres to buy. Leave it blank and the card shows a dash. Prices are yours to enter because they depend on the brand and tin size.
What this calculator does not do
- It does not add primer, undercoat, skirting boards or window frames.
- It does not round up to tin sizes, because they vary by brand.
- It does not allow for textured or very porous surfaces, which use more paint.
- It works for one rectangular room at a time. Run it again for each room, or use the Area Calculator for an odd-shaped wall.
FAQ
How many litres of paint do I need for a bedroom?
It depends on the size. Enter the room length, width and height and the calculator does the sums. For the 4 m by 3 m room above, two coats on the walls and ceiling need about 8.4 litres before extra.
How many square metres does a litre of paint cover?
Retail calculators use 10 m² per litre, and Homebuilding quotes 12 to 14 m² for a standard emulsion. Use the figure printed on your tin.
Do I need two coats?
Most interior walls will, according to Homebuilding. Some paints are sold as one-coat, so check the tin.
Should I buy extra paint?
Wickes and B&Q both recommend about 10 percent extra for errors, damage or obstacles.
Sources and assumptions
- Wickes, paint calculator
- B&Q, wall painting calculator
- Homebuilding, how much paint do I need
- Dulux, how much paint do you need
Assumptions: one rectangular room, flat painted surfaces, 2 m² per door, a coverage you can change, and the extra allowance added to the litres, not the area. The retail coverage figures are not backed by a published source, so treat the result as an estimate and check your tin.





